How to Effectively Maintain the Chassis of a Self Loading Mixer?

In the construction industry, the self loading mixers are widely used due to their efficient transportation and mixing capabilities. However, effective chassis maintenance is essential to ensure its normal operation and extend its service life. Here I have listed some tips for maintaning the self loading mixer chassis for reference:

maintaning the chassis of self loading mixer

Useful Tips for Maintenance of Self Loading Mixer Chassis

1. Setting the Maintenance Schedule

The construction company strictly follows the maintenance schedule provided by the manufacturer of the concrete self loading mixer. Normally, the operator can conduct a full inspection and lubrication every 1,000 kilometers. However, in harsh working conditions, such as extreme heat or dusty environments, the operator can decide to shorten the maintenance interval to every 500 kilometers. The adjustment would effectively reduce the likelihood of breakdowns and ensure the self loading mixer operated efficiently.

2. Choosing the Right Lubricating Oil

To enhance the performance of the self loading mixer, please select lubricating oil that meets the required specifications. Avoid using inferior substitute oils by carefully reviewing the performance to ensure that the main technical indicators are met. Additionally, regularly check the condition of the substitute oil to prevent mechanical failures caused by poor oil quality.
useful tips of chassis maintenance of self loader mixer truck

3. The Process of Changing Engine Oil

When changing the engine oil, the operator follows the principle of draining oil when the engine is warm. It ensures that all the oil is removed. During the draining process, technicians closely observe the color of the oil and check for any foreign particles to identify potential issues early. After completely draining the oil, workers clean any debris from the drain plug and make sure it is securely tightened to prevent leaks.

4. Preparing for Lubrication

Before lubricating, clean the oil inlet to prevent any impurities from entering the system. After lubrication, the operator can clean all surface areas of the parts to ensure no dust or dirt contaminates the lubrication, maximizing its effectiveness.

5. Changing the Oil Filter

When changing the oil, the oil filter is also replaced at the same time. Apply a thin layer of oil on the seal of the new filter to ensure a good seal. Furthermore, please make sure to tighten the filter properly to prevent any leaks.

6. Regular Checks and Maintenance

After each maintenance session, carefully check the oil filter for any signs of leaks. Also verify that the oil level is at the maximum mark on the dipstick, ensuring that the engine has enough oil during operation of self loading mixer.

Best Practices for Chassis Maintenance on self loading mixer

The above is the maintenance method of the chassis of the self loading mixer truck. You can also pay attention to our industry news. We will update the relevant information of the self loading concrete mixer truck from time to time.

    Customize Your Solutions

    Contact us now via email: market11@aimixgroup.com, fill in the form below, or WhatsApp me. We will reply to you soon.

    FEW TIPS:

    • Please describe the type of project (e.g., building house, factory, road, bridge, dam, airport, etc.).

    • Please list the specific equipment or type (e.g. self loading mixer, concrete pump, concrete batching plant, etc.).

    • Please tell us your estimated equipment or project start-up date.

    • Please detail your specific requirements or expectations (e.g., project site, voltage, climate, etc.).

    • If you are interested in becoming our distributor, please let us know.

    Name*

    Email*

    Phone/Whatsapp*

    Country & City*

    Your Project*

    Company

    Message*: